挑選自動點膠機的技能了解一下
1、在你買自動點膠機之前，你需要了解兩件事1. 所用膠水的基本特性：
1. Before you buy an automatic dispenser, you need to know two things 1 Basic characteristics of glue used:
1）這是什么膠水？單組分還是雙組分（AB膠）？
1) What kind of glue is this? One component or two component (AB glue)?
2）如果是雙組份，AB膠的體積比是多少？
2) If it is two-component, what is the volume ratio of AB glue?
3）膠水的粘度和密度？
3) Viscosity and density of glue?
4）膠水大約多長時間開始固化？完全固化時間？
4) How long does the glue begin to cure? Full cure time?
5）如何包裝膠水？
5) How to pack glue?
2. 自動點膠機的工藝要求如下：
2. The process requirements of automatic dispensing machine are as follows:
1）點膠精度要求是什么？每個產品使用多少膠水？
1) What is the dispensing accuracy requirement? How much glue does each product use?
2）灌瓶用膠水嗎？堅持嗎？絕緣？防潮嗎？一點嗎？
2) Do you use glue for bottle filling? Insist? Insulation? Moisture proof? A little?
3）如何實現點膠操作？
3) How to realize dispensing operation?
2、自動點膠機采購技能：
2. Purchasing skills of automatic dispensing machine:
1. 膠水：普通膠水使用單組分點膠機，AB膠使用雙液點膠機，PU膠使用PU膠點膠機，UV膠使用專用注射器點膠機。
1. Glue: single component dispenser is used for ordinary glue, double liquid dispenser is used for AB glue, PU glue dispenser is used for PU glue, and special syringe dispenser is used for UV glue.
2. 點膠工藝：普通點膠采用半自動點膠機（如腳踏控制），定位和打標采用臺式、三軸、圓畫等具有自動功能的點膠機。自動點膠機的自動化功能實際上是一個附屬功能。點膠機在控制膠水方面起著更重要的作用。其他功能可借助自動機械手實現。
2. Dispensing process: semi-automatic dispensing machine (such as foot control) is used for ordinary dispensing, and dispensing machines with automatic functions such as desktop, three-axis and circle painting are used for positioning and marking. The automation function of automatic dispensing machine is actually an auxiliary function. Dispensing machine plays a more important role in controlling glue. Other functions can be realized with the help of automatic manipulator.
3.工作效率和環境：產品少，不追求效率，使用手動膠槍；戶外工作，使用膠槍。要求準確控制比賽，使用機器。如需自動點膠，可選用具有自動功能的機器應使用。
3. Work efficiency and environment: there are few products, do not pursue efficiency, and use manual glue gun; For outdoor work, use glue gun. It requires accurate control of the game and the use of machines. If automatic dispensing is required, a machine with automatic function can be selected.
4. 成本：點膠解決方案有很多，不是所有的點膠都需要使用機器，也不是所有的自動點膠都須附在自動點膠機上。從成本的角度來看，如果某一種膠水需要使用一臺過高的機器，可以考慮更換膠水。如果自動點膠機過高，可以考慮移動產品代替點膠頭。
4. Cost: there are many dispensing solutions. Not all dispensing machines need to be used, and not all automatic dispensing machines must be attached to the automatic dispensing machine. From the perspective of cost, if a certain glue needs to use a machine with too high price, it can be considered to replace the glue. If the price of automatic dispensing machine is too high, mobile products can be considered to replace dispensing head.
This article is provided by you for the two-component glue applicator. Our website is: http://www.bjbxr120.com We will serve you with wholehearted enthusiasm. Welcome to visit!
上一篇：雙組份打膠機有哪些性能特點
下一篇：怎樣調試臥式中空玻璃半自動打膠機
